INFINITI G37 (2007-2015) 3.7L VQ35HR / VQ37VHR V6 – STAGE 1 TUNE
$600.00
INFINITI G35 (2007–2015) – VQ35HR / VQ37VHR V6
STAGE 1 / STAGE 2 PERFORMANCE SOFTWARE TUNE
*** STAGE 1 TUNE PERFORMANCE PACKAGE – ECU SOFTWARE ONLY (FLASHING OPTIONS BELOW) ***
AVAILABLE FOR BOTH MANUAL & AUTOMATIC TRANSMISSION / SEDAN & COUPE
Description
Stage 1 consists of an individual reprogramming of the engine management system, where ignition timing, fueling, throttle response, torque limiters and rev limit are recalibrated for safe, daily-use performance on pump fuel.
Stage 2 is a custom-adjusted calibration in which all relevant engine parameters are further optimized to accommodate additional modifications such as aftermarket sports exhaust, high-flow or catless headers, and upgraded cold air intake systems. Pops & Bangs calibrations are available on suitable hardware.
All maps are developed to deliver the best possible performance and results within safe operating margins, while retaining excellent drivability and street usability.
ECU Tune Features
- Improved throttle response
- Rev hang improvement
- Increased RPM limiter (where allowed by hardware)
- Decat / rear O2 delete included in Stage 2 (where selected)
- Speed limiter (governor) removal – optional
- Optimized for 91–93 octane (Stage and setup dependent)
- Improved fuel efficiency under cruising conditions
- ECU individually reprogrammed for your vehicle
- Optimized responsiveness and drivability
- Datalog analysis–based development
Available Options & Software
Options:
- Speed limiter (governor) removal
- DTC fault code delete (generic OBD P-codes – list required)
- Rear O2 delete software (for decat applications)
Software configurations:
- Stage 1 (89/91 Octane) – requires K&N drop-in air filters
- Stage 1 with Pops & Bangs (89/91 Octane) – requires K&N drop-in air filters & catback exhaust
- Stage 2 (91/93 Octane) – requires cold air intakes & catback exhaust
- Stage 2 with Pops & Bangs (91/93 Octane) – requires cold air intakes & catback exhaust
Typical Performance Gains
| VQ35HR (3.5L) | Original | Stage 1 | Stage 2 |
|---|---|---|---|
| Power (HP) | 306 | 317 | 330 |
| Torque (lb·ft) | 268 | 290 | 305 |
- Recommended parts (Stage 2): Headers
- Required parts (Stage 2): Cat-back exhaust, cold air intake
| VQ37VHR (3.7L) | Original | Stage 1 | Stage 2 |
|---|---|---|---|
| Power (HP) | 328–330 | 345 | 360 |
| Torque (lb·ft) | 269 | 280 | 290 |
- Recommended parts (Stage 2): Headers
- Required parts (Stage 2): Cat-back exhaust, cold air intake
Vehicle / ECU Information
- Production Date: 2007 → 2015
- Engine: VQ35HR / VQ37VHR V6
- ECU Make: Hitachi NEC001-097
- ECU Type: SH7059
- Programming Type: OBD
- Time Required: Approx. 3–4 hours (including read, processing, and write time)
Programming & Flashing Options
1. ECU Bench Programming (Ship-In Service)
- ECUs can be removed from the vehicle and shipped to AMT Tuning for programming.
- We read, program and verify the ECU on the bench, then return it ready to plug back into the vehicle.
- For ECU removal guidance and shipping instructions, please email:sales@amttuning.com
2. OBD Port Tuning at AMT Tuning Ltd (On-Site Only)
- Vehicle can be tuned via the OBD port at AMT Tuning’s facility by appointment.
- Ideal for customers who prefer us to handle the full flashing process on-site.
3. Remote OBD Tuning with BBS OBD2 Tool
- Vehicle is tuned via the OBD2 port using the BBS OBD2 cable and Windows flashing software.
- No ECU opening required; your original (stock) file is read and stored, then the tuned file is written back.
- You can return the car to stock using the same tool while your subscription is active.
- The BBS tool can be used to tune multiple vehicles, however:
- Each additional vehicle requires the purchase of a separate base tune / Stage 1 file.
- Licences/tunes are sold per vehicle/ECU, not per tool.
- Flashing software includes a 1-year subscription for reading/writing; after that, a renewal is required to continue flashing.
4. Alientech Powergate 4 Tuning Tool (Remote OBD – No PC Required)
- Handheld tuning device that works with a smartphone app (iOS / Android / EMUI).
- Connects to the vehicle via OBD and to your phone via Bluetooth; files are managed via the cloud.
- Allows you to read the ECU, flash tuned files, and return to stock without a PC or laptop.
- Supports multiple custom maps (e.g. stock, Stage 1, Stage 2, Pops & Bangs) where available for your setup.
For tool selection, simply choose ECU ship-in, Powergate 4, or BBS OBD2 in the options on this page (pricing is shown per option). If you have any questions about which option is best for you, please email sales@amttuning.com.
| Weight | 0.66 lbs |
|---|---|
| Dimensions | 16 × 14 × 12 in |
| Vehicle Make | Infiniti |
| Vehicle Year | 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 |
| Transmission | 2009—2015), 5 Speed Automatic Transmission – RE5R05A, 6 Speed Manual, 7-speed RE7R01A automatic (all models |
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
