FERRARI F430 – STAGE 1 PERFORMANCE SOFTWARE
$1,990.00
FERRARI F430 (2004 – 2009) 4.3 L V8 – STAGE 1 & STAGE 2 PERFORMANCE TUNE
ECU BOSCH ME7.3 – BENCH FLASH SERVICE
SKU: AMT.FER.430.STG2
Performance Gains
| Specification | Original | Stage 1 | Stage 2 |
|---|---|---|---|
| Power (HP) | 490 | 517 | 540 |
| Torque (lb-ft) | 343 | 362 | 380 |
Required & Recommended Parts
| Tune | Required Parts | Recommended Parts |
|---|---|---|
| Stage 1 | — | BMC Panel Filters |
| Stage 2 | BMC Panel Filters, High-Flow Cats, Sports Exhaust | Headers |
Replacement Air Filter: BMC FB129/03 – Made in Italy (One filter per box)
Overview
The Ferrari F430 Stage 1 and Stage 2 calibrations by AMT Tuning enhance the performance and responsiveness of the legendary 4.3 L V8, offering refined throttle precision, improved torque delivery, and a sharper overall powerband.
Each ECU is individually reprogrammed through bench flashing of the Bosch ME7.3 dual-ECU system, ensuring perfect synchronization between left and right banks. Adjustments are made to ignition timing, fueling, torque limiters, and throttle control, all optimized for 91 Octane / 95 RON fuel.
The Stage 2 calibration further refines exhaust gas dynamics, supporting upgraded sports exhaust systems, high-flow catalytic converters, catless headers, and cold-air intakes for maximum flow and power gains.
Key Features
- Rear O2 Delete (DECAT) for catless header applications
- Optimized for 91 Octane / 95 RON fuel
- Improved throttle response and drivability
- Enhanced fuel efficiency and mid-range torque
- ECU individually reprogrammed on bench
- Optional Pops & Bangs add-on available
- Optional datalog review and test drive for in-house sessions
Vehicle Specifications
| Parameter | Specification |
|---|---|
| Production Years | 2004 – 2009 |
| Engine | 4.3 L V8 |
| ECU Make | Bosch |
| ECU Type | ME7.3 |
| Flash Method | Boot-Mode Bench Flash |
| Time Required | 4 – 5 hours |
Programming Instructions
- Both ECUs must be sent to AMT Tuning for bench reprogramming.
- ECU flashing is performed only on the bench, not via OBD.
- Not available through Powergate or handheld flashing tools.
- For ECU removal and shipping details, see below or email sales@amttuning.com.
ECU Removal Instructions
- Turn the battery disconnect knob (in the front trunk) to the OFF position.
- Locate the ECUs inside the cabin behind the driver’s seat (left side).
- Remove the left carpet covers behind the seat to access the ECU compartment.
- Remove the 10 mm bolts securing the ECU brackets to the frame.
- Release the connectors by pressing the locking clip and lifting the lever upward.
- Clearly mark each ECU as LEFT / RIGHT or FRONT / REAR before shipping.
- Reinstall in reverse order after service completion, ensuring all fasteners are secured before reconnecting battery power.
Shipping Instructions
Please pack both ECUs securely using bubble wrap and a sturdy box with tracking and insurance.
Shipping Address:
AMT Tuning Ltd
6-25 Edilcan Drive
Concord, Ontario L4K 3S4 Canada
Phone: +1 877 469 9440
Email: sales@amttuning.com
| Weight | 0.66 lbs |
|---|---|
| Dimensions | 16 × 14 × 12 in |
| Vehicle Make | Ferrari |
| Vehicle Model | F430 |
| Vehicle Year | |
| Transmission |
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
