FERRARI 488 GTB / SPIDER / PISTA – STAGE 1 PERFORMANCE SOFTWARE
$2,747.99
FERRARI 488 GTB / SPIDER / PISTA (2016–PRESENT) – STAGE 1 & STAGE 2 PERFORMANCE TUNE
3.9L V8 TWIN-TURBO – BOSCH MED17.3.5 – BENCH FLASH SERVICE
SKU: AMT.FER.488.STG2
Performance Gains
| Specification | Original | Stage 1 | Stage 2 |
|---|---|---|---|
| Power (HP) | 670 | 770 | 800 |
| Torque (lb-ft) | 560 | 634 | 665 |
Required & Recommended Parts
| Tune | Required Parts | Recommended Parts |
|---|---|---|
| Stage 1 | — | BMC Panel Filters |
| Stage 2 | BMC Panel Filters, High-Flow Cats, Sports Exhaust | Cold-Air Intake, Catless Downpipes |
Overview
The Ferrari 488 GTB, Spider, and Pista models are equipped with Ferrari’s revolutionary 3.9L twin-turbocharged V8, one of the most celebrated engines ever produced. AMT Tuning’s Stage 1 and Stage 2 software calibrations elevate this masterpiece to entirely new levels of performance and precision.
Our calibrations focus on optimized turbo control, ignition advance, fuel delivery, and torque management, unlocking a massive increase in power and responsiveness. With our Stage 2 configuration, power reaches up to 800 HP and 665 lb-ft of torque, delivering blistering acceleration from 0–100 km/h in as little as 2.7 seconds and a top speed of over 345 km/h.
Key Features
- Individually recalibrated ECU using Bosch MED17.3.5 bench flash
- Optimized boost and torque management for smoother, linear acceleration
- Rear O2 Delete (DECAT) for catless header or downpipe setups
- Enhanced throttle mapping and turbo response
- Optimized for 91 / 95 RON fuel
- Improved fuel efficiency and drive refinement
- Datalogging and post-tune analysis available
Vehicle Specifications
| Parameter | Specification |
|---|---|
| Production Years | 2016 – Present |
| Engine | 3.9L Twin-Turbo V8 |
| ECU Make | Bosch |
| ECU Type | MED17.3.5 |
| Flash Method | Boot-Mode Bench Flash |
| Time Required | 4–5 hours |
Programming Instructions
- Both ECUs must be sent to AMT Tuning for reprogramming.
- ECU tuning is performed via bench flash only, not through OBD.
- Not compatible with Powergate or other handheld flashing tools.
- For removal and shipping details, contact sales@amttuning.com.
Note: OBD tuning is available only for in-house sessions at AMT Tuning Ltd.
ECU Removal Instructions
- Disconnect the battery before beginning any ECU removal.
- Locate the ECU right side wheel fender.
- Remove remove wheel and liner and release the ECU mounting bolts.
- Unplug the ECU connectors carefully by releasing the lock tabs.
- Reinstall in reverse order once returned. Verify all connectors are secure before powering up.
Shipping Instructions
Please pack both ECUs securely using anti-static material or bubble wrap. Ship in a padded box with tracking and insurance.
Shipping Address:
AMT Tuning Ltd
6-25 Edilcan Drive
Concord, Ontario L4K 3S4 Canada
Phone: +1 877 469 9440
Email: sales@amttuning.com
| Weight | 0.66 lbs |
|---|---|
| Dimensions | 16 × 14 × 12 in |
| Vehicle Make | Ferrari |
| Vehicle Model | 488 GTB |
| Vehicle Year | 2016, 2017, 2018, 2019 |
| Transmission | 7-speed dual-clutch automatic gearbox |
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
